Merck 109138 Sodium Hydroxide 0.5 mol/l (0.5 N) Titripur 1 L

0 - Yorum Yap
Stok Kodu
109138.1000
Marka
Havale
0,00 TL (%5,00 havale indirimi)
0,00 TL KDV DAHİL
Sınırlı Stok
TEKLİF İSTE
*
*
*
*
Merck Sodium hydroxide solution c(NaOH) = 0.5 mol/l (0.5 N) Titripur  Cas 1310-73-2  1 Litre
Description
Catalogue Number109138
ReplacesSX0607E; SX0607E-9; SX0607E-3
Alternate Names
  • Karl Fischer
Product Information
HS Code2815 12 00
Quality LevelMQ200
Merck 109138 Sodium Hydroxide 0.5 mol/l (0.5 N) Titripur 1 L
Physicochemical Information
Density1.02 g/cm3 (20 °C)
pH value13.5 (H₂O, 20 °C)
Safety Information according to GHS
Hazard Pictogram(s)Hazard Pictogram(s)
Hazard Statement(s)H290: May be corrosive to metals.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
Precautionary Statement(s)P234: Keep only in original packaging.
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/ eye protection/ face protection.
P302 + P352: IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313: If skin irritation occurs: Get medical advice/ attention.
Signal WordWarning
Storage class8B Non-combustible, corrosive hazardous materials
WGKNWG not water endangering
Disposal28
Aqueous solutions: Container D.
Safety Information
Categories of dangerirritant
Storage and Shipping Information
StorageStore at +15°C to +25°C.
Transport Information
Declaration (railroad and road) ADR, RIDUN 1824 , 8, III
Declaration (transport by air) IATA-DGRUN 1824 , 8, III
Declaration (transport by sea) IMDG-CodeUN 1824 , 8, III, Segregation Group: 18 (Alkalis)
Specifications
Formliquid
Amount-of-substance concentration0.4975 - 0.5025
Measurement uncertainty+/- 0.0015
TraceabilityNIST SRM
Accreditation: This volumetric solution is analyzed by our calibration laboratory D-K-15185-01-00 which is accredited according to DIN EN ISO/IEC 17025 for analysis of amount-of-substance concentrations in volumetric solutions by DAkkS (Deutsche Akkreditierungsstelle - German National Accreditation Body). The accreditation certificate can be found at www.sigmaaldrich.com/ISO17025.
The concentration is determined by volumetric titration and refers to 20°C.
The amount-of-substance concentration of this volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 84 potassium hydrogen phthalate) by means of volumetric standard potassium hydrogen phthalate (article number 1.02400), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.
Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.
Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.
Merck 109138 Sodium Hydroxide 0.5 mol/l (0.5 N) Titripur 1 L Merck 109138 Sodium Hydroxide 0.5 mol/l (0.5 N) Titripur 1 L I Merck Sodium hydroxide solution 0.5 N Titripur®, 1 litre ambalajda, titrasyon uygulamaları için uygun, güvenilir ve standart NaOH çözeltisidir. 109138.1000
Merck 109138 Sodium Hydroxide 0.5 mol/l (0.5 N) Titripur 1 L

Tavsiye Et

*
*
*
IdeaSoft® | E-Ticaret paketleri ile hazırlanmıştır.