MERCK 109065 Perchloric acid in anhydrous acetic acid, for titrations in non-aqueous media c(HClO₄) = 0.1 mol/l (0.1 N) Titripur® Reag. Ph Eur,Reag. USP

MERCK 109065 Perchloric acid in anhydrous acetic acid, for titrations in non-aqueous media c(HClO₄) = 0.1 mol/l (0.1 N) Titripur® Reag. Ph Eur,Reag. USP

0 - Yorum Yap
Stok Kodu
109065.1000
Kategori
Kimyasallar
Marka
Merck
Havale
3.742,06 TL (%5,00 havale indirimi)
* 420,36 TL den başlayan taksitlerle!!
3.939,01 TL KDV DAHİL
TEKLİF İSTE
*
*
*
*
Ürün Bilgisi
Taksit Seçenekleri
Önerileriniz
Ürün Bilgisi
Description
Catalogue Number 109065
Product Information
EC index number 607-002-00-6
EC number 200-580-7
Grade Reag. Ph Eur,Reag. USP
HS Code 3822 00 00
Physicochemical Information
Density 1.06 g/cm3 (20 °C)
Flash point 40 °C
Ignition temperature 485 °C
pH value 0.1 (H₂O, 20 °C)
Safety Information according to GHS
Hazard Pictogram(s)

Hazard Statement(s) H226: Flammable liquid and vapour.
H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
Precautionary Statement(s) P210: Keep away from heat.
P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
Signal Word Danger
Storage class 3 Flammable liquids
WGK WGK 1 slightly water endangering
Disposal 22
Inorganic peroxides and oxidants as well as bromine and iodine should be rendered harmless by reduction with acidic sodium thiosulfate solution (Cat. No. 106513); container D or E. Slightly soluble oxidants should be collected separately in container E or I.
Safety Information
Hazard Symbols Corrosive
Categories of danger flammable, corrosive
R Phrase R 10-35
Flammable.Causes severe burns.
S Phrase S 23-26-45
Do not breathe vapour.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Storage and Shipping Information
Storage Store at +15°C to +25°C.
Transport Information
Declaration (railroad and road) ADR, RID UN 2789 , 8 (3), II
Declaration (transport by air) IATA-DGR UN 2789 , 8 (3), II
Declaration (transport by sea) IMDG-Code UN 2789 , 8 (3), II, Segregation Group: 1 (Acids)
Specifications
Volumetric solution in accordance to the chapter reagents of the Pharmacopoeia (Ph Eur, USP).
Amount-of-substance concentration 0.1000 mol/l
Water content (according to Karl Fischer) 0.1 - 0.2 %
The concentration of this volumetric solution was determined with volumetric standard Tris(hydroxymethyl)aminomethane (article number 1.02408). The determined titer at 20°C was 1.000 with an expanded measurement uncertainty of ± 0.003 (k=2 coverage factor for 95% coverage probability). The certified value is traceable to primary standard NIST SRM 723e (NIST: National Institute of Standards and Technology, USA) by means of volumetric standard Tris(hydroxmethyl)aminomethane, measured in the accredited calibration laboratory of Merck KGaA, Darmstadt, Germany in accordance to DIN EN ISO/IEC 17025.
Note: The titer is a correction factor to correct variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For exact titration results it is recommended to determine a titer with the laboratory specific equipment and conditions directly after opening a bottle of new solution and at regular time intervals.
Taksit Seçenekleri
Önerileriniz
Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.
MERCK 109065 Perchloric acid in anhydrous acetic acid, for titrations in non-aqueous media c(HClO₄) = 0.1 mol/l (0.1 N) Titripur® Reag. Ph Eur,Reag. USP MERCK 109065 Perchloric acid in anhydrous acetic acid, for titrations in non-aqueous media c(HClO₄) = 0.1 mol/l (0.1 N) Titripur® Reag. Ph Eur,Reag. USP I Perchloric acid in anhydrous acetic acid, MERCK 109065.1000 1 LT AMBALAJ SENTEZLAB, SENTEZ, merck 109065, 109065, merck Perchloric acid, merck Perchloric acid 109065, Perchloric acid (0.1 N) Titripur, Perchloric acid 109065.1000
MERCK 109065 Perchloric acid in anhydrous acetic acid, for titrations in non-aqueous media c(HClO₄) = 0.1 mol/l (0.1 N) Titripur® Reag. Ph Eur,Reag. USP

Tavsiye Et

*
*
*
IdeaSoft® | E-Ticaret paketleri ile hazırlanmıştır.