Description
Catalogue Number	104699
Description	IMMERSION OIL FOR MICROSCOPY
Overview	Immersion media are used in conjunction with immersion objectivs and are located between the surface of the specimen and the lens of the microscope. Immersion oils practically eliminate light beam deflection so that the effectiveness of the lens is considerably increased. The 'Immersion Oil for Microscopy' is of an oily nature and has a defined refractive index of about 1,516. It is important that the refractive index (nD) is about 1.5, similar to that of glass. This enables a homogeneous oil immersion to be achieved. It is produced from a natural component and developed, certified and registered as CE / IVD product.

Product Information
HS Code	3824 99 92

Physicochemical Information
Density	1.02 g/cm3 (20 °C)

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statement(s)	P273: Avoid release to the environment.
Storage class	10 - 13 Other liquids and solids
WGK	WGK 2 water endangering
Disposal	3 Relatively unreactive organic reagents should be collected in container A. If halogenated, they should be collected in container B. For solid residues use container C.

Safety Information
Hazard Symbols	Dangerous for the environment Harmful
Categories of danger	harmful, dangerous for the environment
R Phrase	R 22-51/53 Harmful if swallowed.Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
S Phrase	S 61 Avoid release to the environment. Refer to special instructions/ Safety data sheets.

Storage and Shipping Information
Storage	Store at +15°C to +25°C.

Transport Information
Declaration (railroad and road) ADR, RID	UN 3082 , 9, III
Declaration (transport by air) IATA-DGR	UN 3082 , 9, III
Declaration (transport by sea) IMDG-Code	UN 3082 , 9, III, Marine Pollutant: P

Specifications
Refractive index (n 20/D)	1.515 - 1.517
Density (d 20 °C/ 4 °C)	1.0245 - 1.0265
Transmission (380 nm; 1 cm)	≥ 65 %
Transmission (400 nm; 1 cm)	≥ 78 %
Transmission (450 nm; 1 cm)	≥ 90 %
Fluorescence (as quinine at 365 nm)	≤ 1500 ppb
Viscosity (20 °C)	100 - 120 mPa∙s
Suitability for microscopy	passes test

Taksit Seçenekleri

Önerileriniz

Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.

Ürün resmi kalitesiz, bozuk veya görüntülenemiyor.

Ürün açıklamasında eksik bilgiler bulunuyor.

Ürün bilgilerinde hatalar bulunuyor.

Ürün fiyatı diğer sitelerden daha pahalı.

Bu ürüne benzer farklı alternatifler olmalı.

MERCK 104699 Immersion oil for microscopy

Tavsiye Et