Physicochemical Information
Boiling point	107 °C (1013 hPa)
Density	1.12 g/cm3 (20 °C)
Melting Point	-52 °C
pH value	<1 (H₂O, 20 °C)
Vapor pressure	12 hPa (20 °C)
Viscosity kinematic	1.73 mm2/s (20 °C)

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H335: May cause respiratory irritation.
Precautionary Statement(s)	P280: Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
Storage class	8B Non-combustible, corrosive hazardous materials
WGK	WGK 1 slightly water endangering
Disposal	12 Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.

Safety Information
Hazard Symbols	Corrosive
Categories of danger	corrosive
R Phrase	R 34-37 Causes burns.Irritating to respiratory system.
S Phrase	S 26-45 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Storage and Shipping Information
Storage	Storage temperature: no restrictions.

Transport Information
Declaration (railroad and road) ADR, RID	UN 1789 , 8, II
Declaration (transport by air) IATA-DGR	UN 1789 , 8, II
Declaration (transport by sea) IMDG-Code	UN 1789 , 8, II, Segregation Group: 1 (Acids)

Specifications
Assay (alkalimetric)	≥ 25.0 %
Colour	≤ 10 Hazen
Bromide (Br)	≤ 50 ppm
Free chlorine (Cl)	≤ 0.5 ppm
Sulphate (SO₄)	≤ 1 ppm
Sulfite (SO₃)	≤ 1 ppm
Al (Aluminium)	≤ 0.050 ppm
As (Arsenic)	≤ 0.01 ppm
Ba (Barium)	≤ 0.020 ppm
Be (Beryllium)	≤ 0.020 ppm
Bi (Bismuth)	≤ 0.100 ppm
Ca (Calcium)	≤ 0.500 ppm
Cd (Cadmium)	≤ 0.010 ppm
Co (Cobalt)	≤ 0.010 ppm
Cr (Chromium)	≤ 0.020 ppm
Cu (Copper)	≤ 0.020 ppm
Fe (Iron)	≤ 0.200 ppm
Ge (Germanium)	≤ 0.050 ppm
K (Potassium)	≤ 0.100 ppm
Li (Lithium)	≤ 0.010 ppm
Mg (Magnesium)	≤ 0.100 ppm
Mn (Manganese)	≤ 0.010 ppm
Mo (Molybdenum)	≤ 0.020 ppm
NH₄ (Ammonium)	≤ 1 ppm
Na (Sodium)	≤ 0.500 ppm
Ni (Nickel)	≤ 0.020 ppm
Pb (Lead)	≤ 0.020 ppm
Sr (Strontium)	≤ 0.010 ppm
Ti (Titanium)	≤ 0.100 ppm
Tl (Thallium)	≤ 0.050 ppm
V (Vanadium)	≤ 0.010 ppm
Zn (Zinc)	≤ 0.050 ppm
Zr (Zirconium)	≤ 0.100 ppm
Residue on ignition (as SO₄)	≤ 5 ppm
Minimum shelf life: see product label

Taksit Seçenekleri

Önerileriniz

Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.

Ürün resmi kalitesiz, bozuk veya görüntülenemiyor.

Ürün açıklamasında eksik bilgiler bulunuyor.

Ürün bilgilerinde hatalar bulunuyor.

Ürün fiyatı diğer sitelerden daha pahalı.

Bu ürüne benzer farklı alternatifler olmalı.

MERCK 100316 Hydrochloric acid 25% for analysis EMSURE

Tavsiye Et